Quad Voltage Controlled Amplifiers and Mixer Module for Eurorack
Product Features
-
Ultra-low noise quad VCA and mixer module
-
Each VCA features manual Level control for independent mixing
-
Dedicated CV attenuators with dual LED's for monitoring of bipolar CV signals
-
Adjustable VCA response curve from linear to exponential
-
Each CV input is normalled to the adjacent input for cascaded control
-
Each output is normalled to the mix input of the adjacent output for cascaded control
-
Each VCA features a Boost switch for increased output level (6 dB)
-
16 controls and switches give you real-time access to all important parameters
-
Eurorack specs: 12 HP, 100 mA +12V, 100 mA -12V
Modular Synthesis
The first synth modules came out in the 60s and tended to be extremely expensive. The FOUR PLAY is a modern compact and versatile module giving you four independent VCA’s which can also be used as a 4-channel voltage-controlled mixer for amazing flexibility. Modular synths were a landmark development in electronic music and today, it’s about to get better.
FOUR PLAY
This is the Behringer FOUR PLAY. A high performance quad VCA and mixer module that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the FOUR PLAY in with your existing rig or start your modular synth journey from here. Either way you’re sure to have a lot of fun.
Mix It Up
The FOUR PLAY is a feature rich quad VCA module with CV input attenuators, each with a bi-color LED to indicate CV input activity and polarity. Input boost switches add extra gain for lower level input signals. The curve controls allow you to setup the ideal CV response curve from fully exponential to linear, or any combination of the two. The level controls set the VCA gain and allow manual control of the signal output level, both when used as independent VCA’s or when used as a mixer. The VCA’s are DC coupled so can process both audio signals and CV signals.
Ins and Outs
The FOUR PLAY gives you comprehensive connectivity, 4 CV inputs for control or modulation of the VCA’s which are cascaded allowing all 4 VCA’s to be controlled by a single CV input if required. 4 signal input jacks with excellent headroom and the 4 VCA outputs are cascaded so that if only the 4/MIX output jack is used, the module becomes a 4-input voltage-controlled mixer, other combinations are easily selected according to which output jacks are inserted, such as a dual 2 input mixers for ultimate flexibility.
Eurorack Ready
Installing the FOUR PLAY is easy as it is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows the FOUR PLAY to be mixed with other synth modules for a truly unique set up.
Specification
Inputs
| CV in | |
| Type |
4 x 3.5 mm TS jacks, DC coupled |
| Impedance |
> 1 MΩ, unbalanced, half normalled |
| Max input level |
10 V p-p |
| In | |
| Type |
4 x 3.5 mm TS jack, DC coupled |
| Impedance |
30 kΩ, 15 kΩ with boost enabled, unbalanced |
| Max input level |
+19 dBu |
Outputs
| Type |
4 x 3.5 mm TS jack, DC coupled |
| Impedance |
100 Ω, unbalanced, half normalled |
| Max output level |
+19 dBu |
| Output noise at unity gain |
-92 dBu, 22 Hz-22 kHz |
| Output noise at full attenuation |
-98 dBu, 22 Hz-22 kHz |
| Maximum attenuation |
-97 dB at 1 kHz |
Controls
| CV attenuator |
-∞ to unity gain |
| Exp/Lin |
Exponential to linear CV response |
| Level |
-∞ to unity gain |
| Boost switch |
Adds +6 dB input gain |
| CV LED |
Green =positive CV, Red =negative CV |
Power
| Power supply |
Eurorack |
| Current draw |
100 mA (+12 V), 100 mA (-12 V) |
Physical
| Standard operating temperature range |
5° C to 40° C (41° F to 104° F) |
| Dimensions |
60.6 x 129 x 41.3 mm (2.39 x 5.08 x 1.63") |
| Rack units |
12 HP |
| Weight |
0.14 kg (0.31 lbs) |
FOUR PLAY
Quad Voltage Controlled Amplifiers and Mixer Module for Eurorack
Product Features
-
Ultra-low noise quad VCA and mixer module
-
Each VCA features manual Level control for independent mixing
-
Dedicated CV attenuators with dual LED's for monitoring of bipolar CV signals
-
Adjustable VCA response curve from linear to exponential
-
Each CV input is normalled to the adjacent input for cascaded control
-
Each output is normalled to the mix input of the adjacent output for cascaded control
-
Each VCA features a Boost switch for increased output level (6 dB)
-
16 controls and switches give you real-time access to all important parameters
-
Eurorack specs: 12 HP, 100 mA +12V, 100 mA -12V
Modular Synthesis
The first synth modules came out in the 60s and tended to be extremely expensive. The FOUR PLAY is a modern compact and versatile module giving you four independent VCA’s which can also be used as a 4-channel voltage-controlled mixer for amazing flexibility. Modular synths were a landmark development in electronic music and today, it’s about to get better.
FOUR PLAY
This is the Behringer FOUR PLAY. A high performance quad VCA and mixer module that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the FOUR PLAY in with your existing rig or start your modular synth journey from here. Either way you’re sure to have a lot of fun.
Mix It Up
The FOUR PLAY is a feature rich quad VCA module with CV input attenuators, each with a bi-color LED to indicate CV input activity and polarity. Input boost switches add extra gain for lower level input signals. The curve controls allow you to setup the ideal CV response curve from fully exponential to linear, or any combination of the two. The level controls set the VCA gain and allow manual control of the signal output level, both when used as independent VCA’s or when used as a mixer. The VCA’s are DC coupled so can process both audio signals and CV signals.
Ins and Outs
The FOUR PLAY gives you comprehensive connectivity, 4 CV inputs for control or modulation of the VCA’s which are cascaded allowing all 4 VCA’s to be controlled by a single CV input if required. 4 signal input jacks with excellent headroom and the 4 VCA outputs are cascaded so that if only the 4/MIX output jack is used, the module becomes a 4-input voltage-controlled mixer, other combinations are easily selected according to which output jacks are inserted, such as a dual 2 input mixers for ultimate flexibility.
Eurorack Ready
Installing the FOUR PLAY is easy as it is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows the FOUR PLAY to be mixed with other synth modules for a truly unique set up.
Specification
Inputs
| CV in | |
| Type |
4 x 3.5 mm TS jacks, DC coupled |
| Impedance |
> 1 MΩ, unbalanced, half normalled |
| Max input level |
10 V p-p |
| In | |
| Type |
4 x 3.5 mm TS jack, DC coupled |
| Impedance |
30 kΩ, 15 kΩ with boost enabled, unbalanced |
| Max input level |
+19 dBu |
Outputs
| Type |
4 x 3.5 mm TS jack, DC coupled |
| Impedance |
100 Ω, unbalanced, half normalled |
| Max output level |
+19 dBu |
| Output noise at unity gain |
-92 dBu, 22 Hz-22 kHz |
| Output noise at full attenuation |
-98 dBu, 22 Hz-22 kHz |
| Maximum attenuation |
-97 dB at 1 kHz |
Controls
| CV attenuator |
-∞ to unity gain |
| Exp/Lin |
Exponential to linear CV response |
| Level |
-∞ to unity gain |
| Boost switch |
Adds +6 dB input gain |
| CV LED |
Green =positive CV, Red =negative CV |
Power
| Power supply |
Eurorack |
| Current draw |
100 mA (+12 V), 100 mA (-12 V) |
Physical
| Standard operating temperature range |
5° C to 40° C (41° F to 104° F) |
| Dimensions |
60.6 x 129 x 41.3 mm (2.39 x 5.08 x 1.63") |
| Rack units |
12 HP |
| Weight |
0.14 kg (0.31 lbs) |
Quad Voltage Controlled Amplifiers and Mixer Module for Eurorack
Product Features
-
Ultra-low noise quad VCA and mixer module
-
Each VCA features manual Level control for independent mixing
-
Dedicated CV attenuators with dual LED's for monitoring of bipolar CV signals
-
Adjustable VCA response curve from linear to exponential
-
Each CV input is normalled to the adjacent input for cascaded control
-
Each output is normalled to the mix input of the adjacent output for cascaded control
-
Each VCA features a Boost switch for increased output level (6 dB)
-
16 controls and switches give you real-time access to all important parameters
-
Eurorack specs: 12 HP, 100 mA +12V, 100 mA -12V
Modular Synthesis
The first synth modules came out in the 60s and tended to be extremely expensive. The FOUR PLAY is a modern compact and versatile module giving you four independent VCA’s which can also be used as a 4-channel voltage-controlled mixer for amazing flexibility. Modular synths were a landmark development in electronic music and today, it’s about to get better.
FOUR PLAY
This is the Behringer FOUR PLAY. A high performance quad VCA and mixer module that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the FOUR PLAY in with your existing rig or start your modular synth journey from here. Either way you’re sure to have a lot of fun.
Mix It Up
The FOUR PLAY is a feature rich quad VCA module with CV input attenuators, each with a bi-color LED to indicate CV input activity and polarity. Input boost switches add extra gain for lower level input signals. The curve controls allow you to setup the ideal CV response curve from fully exponential to linear, or any combination of the two. The level controls set the VCA gain and allow manual control of the signal output level, both when used as independent VCA’s or when used as a mixer. The VCA’s are DC coupled so can process both audio signals and CV signals.
Ins and Outs
The FOUR PLAY gives you comprehensive connectivity, 4 CV inputs for control or modulation of the VCA’s which are cascaded allowing all 4 VCA’s to be controlled by a single CV input if required. 4 signal input jacks with excellent headroom and the 4 VCA outputs are cascaded so that if only the 4/MIX output jack is used, the module becomes a 4-input voltage-controlled mixer, other combinations are easily selected according to which output jacks are inserted, such as a dual 2 input mixers for ultimate flexibility.
Eurorack Ready
Installing the FOUR PLAY is easy as it is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows the FOUR PLAY to be mixed with other synth modules for a truly unique set up.
Specification
Inputs
| CV in | |
| Type |
4 x 3.5 mm TS jacks, DC coupled |
| Impedance |
> 1 MΩ, unbalanced, half normalled |
| Max input level |
10 V p-p |
| In | |
| Type |
4 x 3.5 mm TS jack, DC coupled |
| Impedance |
30 kΩ, 15 kΩ with boost enabled, unbalanced |
| Max input level |
+19 dBu |
Outputs
| Type |
4 x 3.5 mm TS jack, DC coupled |
| Impedance |
100 Ω, unbalanced, half normalled |
| Max output level |
+19 dBu |
| Output noise at unity gain |
-92 dBu, 22 Hz-22 kHz |
| Output noise at full attenuation |
-98 dBu, 22 Hz-22 kHz |
| Maximum attenuation |
-97 dB at 1 kHz |
Controls
| CV attenuator |
-∞ to unity gain |
| Exp/Lin |
Exponential to linear CV response |
| Level |
-∞ to unity gain |
| Boost switch |
Adds +6 dB input gain |
| CV LED |
Green =positive CV, Red =negative CV |
Power
| Power supply |
Eurorack |
| Current draw |
100 mA (+12 V), 100 mA (-12 V) |
Physical
| Standard operating temperature range |
5° C to 40° C (41° F to 104° F) |
| Dimensions |
60.6 x 129 x 41.3 mm (2.39 x 5.08 x 1.63") |
| Rack units |
12 HP |
| Weight |
0.14 kg (0.31 lbs) |
other products
SHIPPING
Domestic delivery only
PRODUCT WARRANTY
For electric and electronic product only.
MAINTENANCE
Only products purchased from importers and dealer that has a warranty on the product.